Showing posts with label Copper. Show all posts
Showing posts with label Copper. Show all posts

Wednesday, May 20, 2015

Metal Interconnects for 7 nm Process

Co ELD on Palladium/Tungsten (Pd/W) for different timed stops to yield an (i) under fill, (ii) potential ideal stop or an (iii) overburden in 28nm holes
Metal interconnects is a keys area that limits the shrinking of semiconductor die size. A recent advance in the development of the 7 nm technology is reported below by IMEC with Lam research.

"Co ELD technique was demonstrated as a feasible method for highly selective bottom-up contact fill and via prefill with Cobalt (Co) as an alternative metal to Copper (Cu). Moreover, the high selectivity of the ELD process, at lower cost compared to Chemical Vapor Deposition (CVD), intrinsically ensures a good metal-to-metal interface and paves the way to void-free via filling and increased yield."

Ron
Insightful, timely, and accurate semiconductor consulting.
Semiconductor information and news at - http://www.maltiel-consulting.com/







During the IEEE IITC conference in Grenoble, the nanoelectronics research center imec and Lam Research Corporation today presented a novel bottom-up prefill technique for vias and contacts. The technique, based on Electroless Deposition (ELD) of Cobalt (Co) is a highly selective method resulting in void-free filling of via and contact holes. Potentially increasing the circuit performance, it is a promising path to scaling advanced interconnects and enabling future logic and DRAM nodes at the 7nm node and below.
As logic and memory nodes scale, performance of these advanced interconnects is negatively impacted by increasing interconnect resistance. Furthermore, voids that occur in heavily scaled vias severely impact yield. imec’s industrial affiliation program on advanced interconnects is exploring novel metallization methods to solve these issues. One way to solve the problem is to identify integration and metallization alternatives that provide resistance benefits over conventional technology without compromising reliability and yield. Together with Lam Research, a Co ELD technique was demonstrated as a feasible method for highly selective bottom-up contact fill and via prefill with Cobalt (Co) as an alternative metal to Copper (Cu). Moreover, the high selectivity of the ELD process, at lower cost compared to Chemical Vapor Deposition (CVD), intrinsically ensures a good metal-to-metal interface and paves the way to void-free via filling and increased yield. Trench fill yield and line resistance may also benefit from the de-coupling of line and via aspect ratios, permitting the design of each for optimum Resistance/Capacitance (RC). Therefore, Co prefill ELD has the potential to enable future scaling of advanced logic and memory technologies.
Figure: Co ELD on Palladium/Tungsten (Pd/W) for different timed stops to yield an (i) under fill, (ii) potential ideal stop or an (iii) overburden in 28nm holes (Aspect Ratio (AR) 4.5)
Figure: Co ELD on Palladium/Tungsten (Pd/W) for different timed stops to yield an (i) under fill, (ii) potential ideal stop or an (iii) overburden in 28nm holes (Aspect Ratio (AR) 4.5)
The results were achieved in cooperation with imec’s key partners as part of its core CMOS programs: GlobalFoundries, Intel, Samsung, SK hynix, Sony, TSMC, Amkor, Micron, Utac, Qualcomm, Altera, Fujitsu, Panasonic, and Xilinx.

Wednesday, July 3, 2013

Interconnect Issues: History and Future Prospects

Interconnection play a key role in shrinking semiconductor chips, the latest interconnection issues are discussed below:

"The research pipeline of the semiconductor industry involves increasingly radical potential solutions to carry technology advancement through dimensional scaling to beyond-conventional CMOS. Many logic devices are under investigation to extend Moore’s Law to beyond the year 2020. These logic devices differ in structure and operating principles, and include various physical quantities that may be used for encoding information, such as charge, electric dipole, magnetic dipole (spin), orbital state, mechanical position, light intensity, etc. However, any device technology that offers advantages in performance, power dissipation or ease in dimensional scaling will have to be complemented with an interconnect technology that offers similar trades to avoid major bottlenecks due to interconnects. Various carbon-based interconnects were shown to have comparable or better performance compared to Cu/low-k in terms of both resistance-capacitance (rc) product and energy-delay-product."
 
Ron
Insightful, timely, and accurate semiconductor consulting.
Semiconductor information and news at - http://www.maltiel-consulting.com/
 

See an earlier article below

Interconnect Issues: History and Future Prospects, Part 2

Ahmet Ceyhan, Azad NaeemiGeorgia Institute of Technology
The research pipeline of the semiconductor industry involves increasingly radical potential solutions to carry technology advancement through dimensional scaling to beyond-conventional CMOS. Many logic devices are under investigation to extend Moore's Law to beyond the year 2020. These logic devices differ in structure and operating principles, and include various physical quantities that may be used for encoding information, such as charge, electric dipole, magnetic dipole (spin), orbital state, mechanical position, light intensity, etc.[1] However, any device technology that offers advantages in performance, power dissipation or ease in dimensional scaling will have to be complemented with an interconnect technology that offers similar trades to avoid major bottlenecks due to interconnects, which were described in [2]. Various carbon-based interconnects were shown to have comparable or better performance compared to Cu/low-k in terms of both resistance-capacitance (rc) product and energy-delay-product (EDP).[2]
 
The aim of this article is to investigate the interactions of interconnects with various voltage-controlled, charge-based devices similar to the conventional Si-CMOS transistor, including high-performance and ultra-low-power options. For that purpose, we pair finFETs, MOSFET-like carbon nanotube FETs (CNFETs), homojunction III-V tunnel FETs (TFETs) and sub-threshold CMOS devices with conventional Cu/low-k and emerging interconnect options; and we compare the relative performances at the circuit level. These device and interconnect technology options are illustrated in Figure 1. Since various device technologies offer very different characteristics in terms of the output current, input capacitance, subthreshold swing, etc., the constraints that they put on interconnects and the best interconnect option for each device are different as well.
 
This difference stems from the fact that the impacts of technology parameters of various interconnect technologies on the speed and energy advantages of a circuit may differ depending on the transistors used. Emerging carbon nanotube (CNT) and graphene nanoribbon (GNR) interconnects are mostly more resistive than Cu/low-k [3,4], but they offer lower capacitances.
 
Based on the Berkeley Short-channel IGFET Common Gate Model (BSIM-CMG),[5] predictive technology models (PTMs) for finFET devices are developed jointly by the Arizona State University PTM Group and ARM.[6] The development of the model parameters for the BSIM-CMG model is performed using the scaling theory of multi-gate devices, physical models and ITRS projections. Compared to planar bulk CMOS devices, finFET devices have significantly improved short channel effects (SCE) due to better electrostatics, can carry more current and offer improved area efficiency. The channel width is quantized; hence, the number of fins has to be optimized for drive current choices.
 
CNFET devices are alternative solutions to performance enhancement of transistors in the "atomic dimension limit" beyond 2020. A compact model developed by Deng et al.[7] is calibrated to meet reasonable ON current requirements while controlling the threshold voltage to keep leakage current at a reasonable value; and used for simulating MOSFET-like CNFET gates at the 16 nm technology node to predict the circuit- and system-level properties of CNFET devices. This model includes various non-idealities, such as the quantum confinement effects on both circumferential and axial directions, elastic scattering in the channel region, the resistive source/drain, the Schottky-barrier resistance, the acoustical and phonon scattering in the channel region, the screening effect by the parallel CNTs in CNFETs that contain multiple parallel CNTs under the same gate, and parasitic gate capacitances. The rest of both articles
 
Interconnect