Monday, March 2, 2015

ISSCC 2015 -Latest Circuits Innovations

Below are some highlights from 2015 " International Solid-State CircuitsConference once again served up a smorgasbord of silicon innovations."

It is interesting that while Samsung is continuing to develop 3D devices and processing on a single chip -

"Samsung described a second generation of its 128 Gbit 3-D NAND flash, a 3-bit/cell version with 32 layers now in production on a 68.9mm2 die. The Korean giant is ahead of the pack in dense flash and also is expected to beat TSMC to market with 14/16nm FinFET logic later this year, a fact that help it retain archrival Apple as a foundry customer."

ITRS and Intel focus on developing chip stacks - 

"Paolo Gargini who leads the ITRS semiconductor road map effort said chip stacks are today what high-K metal gate design was in 2007, the next big requirement for progress.

Intel fellow Mark Bohr disagreed. “We need vertical interconnects one or two orders of magnitude more dense than today’s through-silicon vias,” he said"


Ron
Insightful, timely, and accurate semiconductor consulting.
Semiconductor information and news at - http://www.maltiel-consulting.com/





18 Views of ISSCC

Intel, Xilinx debate 3-D chip stacks
Rick Merritt  2/26/2015 10:42 AM EST 

Friday, February 20, 2015

3D Flash NAND, SSD Challenges

The article below discusses progress in applying 3D processes in fabrication of next generation flash memory. 








Some of the key challenges in developing this technology are:

"challenges on the manufacturing front. In no particular order, alternating stack deposition, metal deposition, high-aspect-ratio etch and metrology are arguably the most difficult process steps for 3D NAND. “Above all, metrology was the most underestimated and under-invested for the industry’s readiness for vertical NAND,” said Naga Chandrasekaran, vice president of process R&D at Micron Technology. “We have these vertical structures and recessed structures within these vertical spaces, but we cannot measure them today....”


My 1990 patent ( Electrical measurements of the profile of semiconductor devices during their manufacturing process ) would help resolving the vertical Metrology difficulties.



More about the processing difficulties is in Applied Materials talks about 3D NAND flash production .


Ron
Insightful, timely, and accurate semiconductor consulting.
Semiconductor information and news at - http://www.maltiel-consulting.com/





3D NAND Market Heats Up

Chips from Samsung, Intel, Micron being sampled, with others on the way.
popularity
After some delays and uncertainty in past years, the 3D NAND market is finally heating up.
In 2013 and 2014, Samsung was the only vendor participating in the 3D NAND market. Most other suppliers were supposed to ship 3D NAND devices in volumes last year, but vendors pushed out their production dates for various business and technical reasons.
Going into 2015, Samsung continues to expand its 3D NAND production. In addition, Micron and its 3D NAND partner, Intel, have recently begun sampling 3D NAND chips, with production slated for the second half of 2015. Another 3D NAND vendor, SK Hynix, plans to move into pilot production later this year.
As previously stated, the SanDisk/Toshiba duo won’t ship 3D NAND until 2016. Meanwhile, Spansion and China’s XMC recently announced a joint agreement to make 3D NAND, with production slated for 2017.
Still, 3D NAND isn’t expected to move into mainstream production until 2017, which is a year or two later than expected. 3D NAND is the eventual successor to today’s 2D NAND, but 3D NAND is more difficult to make than previously thought. 3D NAND resembles a skyscraper, in which horizontal levels are stacked and then connected using tiny vertical channels.
“(3D NAND) will start to ramp in 2016, but it’s a new technology and it will take time to qualify in applications,” said Greg Wong, an analyst with Forward Insights. “It will gain steam in 2017.”
Still, OEMs want to get their hands on 3D NAND sooner than later. So, 3D NAND customers may be asking themselves some simple questions—What are the challenges? And what will it take to get the technology over the hump?
As it turns out, there are a number of challenges on the manufacturing front. In no particular order, alternating stack deposition, metal deposition, high-aspect-ratio etch and metrology are arguably the most difficult process steps for 3D NAND. “Above all, metrology was the most underestimated and under-invested for the industry’s readiness for vertical NAND,” said Naga Chandrasekaran, vice president of process R&D at Micron Technology. “We have these vertical structures and recessed structures within these vertical spaces, but we cannot measure them today.”
Why 3D NAND?
For the foreseeable future, today’s 2D NAND will remain the mainstream technology due to costs. In 2D NAND, the transistor has two gates. The control gate is on the top of the device. The floating gate is in the middle, which is surrounded by a dielectric.
Thanks to 193nm immersion and self-aligned double/quadruple patterning, vendors have extended planar NAND down to the 1xnm node. But at that node, vendors are struggling to scale the floating gate. “In fact, the floating gate is seeing an undesirable reduction in the capacitive coupling to the control gate,” said Jim Handy, an analyst with Objective Analysis.
2D NAND will run out of steam at 10nm, prompting the need for 3D NAND. Unlike planar NAND, 3D NAND makes use of vertical stacks or layers to increase the densities.
Today, the big market for 3D NAND is solid-state drives (SSDs) for niche-oriented enterprise applications. But as 3D NAND becomes more cost competitive, the devices are moving beyond the enterprise. “We (will bolster) our product competitiveness by expanding V-NAND in all segments of SSDs,” said Ji Ho Pak, vice president of memory marketing at Samsung Electronics, in a recent conference call.
Samsung refers to its 3D NAND technology as V-NAND. So far, the company has introduced two V-NAND devices, including 24- and 32-layer chips, based on 30nm to 40nm design rules.
But even at 32 layers, 3D NAND still does not reach cost parity with 2D NAND, keeping 3D NAND at a price premium. In 2015, though, vendors are expected to ship 40- and 48-layer devices, which will bring 3D NAND closer to the price-per-bit curve with 2D NAND.
“It’s a moving target where the true crossover is in terms of the cost-per-bit,” said Bradley Howard, vice president of the Etch Advanced Technology unit at Applied Materials. “The crossover will probably occur closer to 40 to 48 device stacks, as opposed to the 24 and 32 device stacks you are seeing now.”
Howard is also seeing a big shift in the 3D NAND ramp. “We can see the wave building up over the course of this year, based on the interest in tool buys and product ramps,” he said. “And you will see the big ramps going on probably at the end of this year and into 2016.”
At the end of 2014, there were a total of 60,000 to 65,000 wafers starts per month (wspm) in terms of installed capacity for 3D NAND, said Martin Anstice, president and chief executive of Lam Research, in a recent conference call.
Of that figure, Samsung had around 40,000 wspm of installed capacity, according to Pacific Crest Securities. By the end of 2015, the industry is projected to have a total of 130,000 wspm (plus or minus 10,000) of 3D NAND capacity installed, Lam’s Anstice said.
The new litho: alternating stack deposition
Still, there are some big challenges. To make the technology more cost competitive, vendors must scale 3D NAND well beyond 48 layers. In fact, the number of layers is not determined by traditional lithography. Planar NAND requires advanced lithography, while 3D NAND does not. Because the current 3D NAND devices make use of trailing-edge design rules, the challenges shift from lithography to deposition and etch.
The 3D NAND flow starts with a substrate. Then, vendors undergo the first major challenge in the flow—alternating stack deposition. Using chemical vapor deposition (CVD), alternating stack deposition involves a process of depositing and stacking thin films layer by layer on the substrate.
This process is much like making a layer cake. As a chipmaker adds more layers, the device becomes more complex. “Obviously, with these multiple layers, uniformity, repeatability and low defects are becoming critical,” Applied Howard’s said.
There are other issues. “Those alternating layers require a very precise thickness. They require film and surface integrity between each of the layers. And you have to do that in a cost effective way. If I’m putting down 32, 40 and 64 layers, you don’t want it to take forever,” said Dave Hemker, senior vice president and chief technology officer at Lam Research. “There is also a stress concern. As you put down dielectric films, they could have varying degrees of tensile or compressive stress. With a couple of layers, it’s not really something to worry about. But when you start stacking so many of these layers on top of each other, you can run into problems.”
High-aspect ratio etch
Following that step, a hard mask is applied on the surface and holes are patterned on the top. Then, here comes the next hard part. High-aspect ratio trenches are etched from the top of the device to the substrate.
“It’s not just the aspect ratios, but it’s also how deep we have to go,” Applied’s Howard said. “If you take typical planar NAND, you are looking at 12:1 or 15:1 contacts. In 3D NAND, you are looking at 40:1 to 60:1 high-aspect ratios.”
To illustrate the complexity, Samsung’s initial 24-layer device has 2.5 million tiny trenches or channels in the same chip. Each of them must be parallel and uniform. “You need to have perfectly vertical profiles and they need to maintain the CD,” added Lam’s Hemker.
Metal deposition
After the trenches are formed, the device requires contacts. The device is backfilled with a conductor using a metal deposition step.
“There is a challenge in the metal deposition area,” Hemker said. “Typically, in one of the flows, they will wet etch out a nitride layer and backfill it. We’re seeing a lot of customers’ backfilling it with tungsten. And that’s a tricky deposition, because you are doing a non-line of sight deposition. So you basically have these caves and tunnels in there. You have to go back in there after the fact and put in tungsten metal. If you don’t engineer the process right, you may put in this pre-cursor that wants to plate out metallic tungsten. Given its own way, it could plate out right when it gets into the hole. So you have a lot of ways to create voids.”
Metrology
At various steps, the structure goes through a rigorous metrology and inspection flow. The workhorse metrology tool is the scanning electron microscope, which measures the critical dimensions in chips. Another technology, optical scatterometry, analyzes changes in the intensity of light.
One of the many challenges is to find a defect in a multi-layer 3D NAND stack and determine its exact location. “If you look at a planar device, you can look at the top down and get a feel for what’s going on,” Applied’s Howard said. “In these 3D structures, you start getting into 32 or 48 layers. If there’s something going on somewhere in the middle of that stack, your ability to see it is a challenge.”
The big problem is that the current metrology tools are falling short. “The vertical NAND industry is moving very fast, but the characterization requirements of vertical NAND are significant and we don’t have the right techniques in place,” Micron’s Chandrasekaran said.
3D NAND vendors can use the existing metrology tools, at least to some degree. “The tool says there is a defect, but I can’t see it,” Chandrasekaran said. “You have to do a cross section, and you need to find the defect. Then you wait for an electrical signature. That’s too long.”
The metrology tools are making progress, although somewhat more slowly than the industry wants. “It’s taking the traditional methodology and trying to get a better understanding of the data coming off of it,” Applied’s Howard said. “For example, if you are putting an e-beam on a surface, you are getting electron beams on and secondary electrons are coming off. How to interpret that signal gives you the information. There is a lot of work going in how to interpret the signals. As we get more and more data coming out, the ability to build the right algorithms for interpreting the data will mature over time.”
Still, there is room for innovation in the arena. “Everyone knew inspection would be difficult. But it turned out to be very difficult. That’s one of the areas where there is a lot of opportunity for improvement,” he said.

Monday, February 2, 2015

Samsung, Apple's iPhone, and Fabs Consolidation

The increasing cost of semiconductor fabrication has led to consolidation of fabs over the last few years (see March 2012 Moore's Law End? (Next semiconductors gen. cost $10 billion). 

At the same time Apple was facing the risk of depending on a single semiconductor fabrication source ( Foundry Rankings (Including Samsungs' iPad, iPhone Breakdown).

It makes sense for Apple to diversify its chip production as discussed below.

"KGI Research predicted that Samsung would end up producing around 75 percent of the A9 chips with Global Foundry manufacturing the rest...
Another report from BusinessKorea .. Apple would be using Samsung almost exclusively for manufacturing NAND flash storage, RAM and batteries for the upcoming iPhone 6s and the Apple Watch."

See also report of Apple's A9 production using Samsung's 14nm FinFET made by both Samsung and GlobalFoundaries (Samsung-GlobalFoundries deal gives Apple’s chip production greater flexibility

Another benefit for Apple is control of its chips price supplied by using more than one vendor.


Ron
Insightful, timely, and accurate semiconductor consulting.
Semiconductor information and news at - http://www.maltiel-consulting.com/






iPhone 7, iPad 2015 Specs News: Apple Seen Picking Samsung To Manufacture Most A9 Chips For New iPhones, iPads

YOUTUBE/APPLE
The A8 chip.
Rumors swirling around Apple's new devices in its iPhone and iPad ranges continue, with the latest concerning what type of chip will be used. All recent rumors pointed towards Samsung winning the contract to manufacture the bulk of the new A9 chips, which will be at the heart of the new iPhones and iPads.
Initially, it was reported that Taiwan Semiconductor Manufacturing Company had won the contract and would be manufacturing most of the A9 chips. However, soon after another report stated that instead of the Taiwan company, Samsung had been contracted to supply most of the A9 and A9X chips that would be used on the new iPhones and iPads.
With no official confirmation on the subject, speculations have increased on the company that would eventually produce the new Apple chip. In a recent statement, Samsung declined to provide any information, saying that "it does not comment on market speculation"
A report by KGI Research predicted that Samsung would end up producing around 75 percent of the A9 chips with Global Foundry manufacturing the rest. This report followed an earlier note by KGI Research that pointed towards Apple spreading out the production of the chip among the Taiwan semiconductor company, Samsung, Qualcomm, Global Foundry and Intel. It also hinted that Apple had tapped Samsung for manufacturing the S1 chips which will be featured in the upcoming Apple Watch. As for the Taiwan company, it will be more involved in producing the S2 chip which will be used in future versions of the Apple Watch.
Another report from BusinessKorea last month stated that Apple would be using Samsung almost exclusively for manufacturing NAND flash storage, RAM and batteries for the upcoming iPhone 6s and the Apple Watch.
While all these reports are speculations at this point, several research houses have noted that Apple is looking to engage many suppliers to produce the A9 chip in order to minimize any risks involved.

Friday, January 23, 2015

Apple Watch battery life, A5-caliber CPU inside

Apple watch battery life is a key factor in how useful this new computer interface will be in our lives. Some information is discussed in the article below. 
"Apple opted to use a relatively powerful processor and high-quality screen for the Apple Watch, both of which contribute to significant power drain. Running a stripped-down version of iOS codenamed SkiHill, the Apple S1 chip inside the Apple Watch is surprisingly close in performance to the version of Apple's A5 processor found inside the current-generation iPod touch,"

More about A5 power consumption is in May 2012 article Apple's A5 Die Shrink, Improve Battery Life, Cut Cost .


 Ron
Insightful, timely, and accurate semiconductor consulting.
Semiconductor information and news at - 
http://www.maltiel-consulting.com/





Apple targets for Apple Watch battery life revealed, A5-caliber CPU inside



Although Apple has said that the Apple Watch will need to be charged nightly, the company has not disclosed any details on how long the wearable's battery will last. For the first time, people with knowledge of the Apple Watch's development have provided us with the specific performance targets Apple wants to achieve for the Apple Watch battery, but the actual numbers may fall short of those targets.

According to our sources, Apple opted to use a relatively powerful processor and high-quality screen for the Apple Watch, both of which contribute to significant power drain. Running a stripped-down version of iOS codenamed SkiHill, the Apple S1 chip inside the Apple Watch is surprisingly close in performance to the version of Apple's A5 processor found inside the current-generation iPod touch, while the Retina-class color display is capable of updating at a fluid 60 frames per second.
Apple initially wanted the Apple Watch battery to provide roughly one full day of usage, mixing a comparatively small amount of active use with a larger amount of passive use. As of 2014, Apple wanted the Watch to provide roughly 2.5 to 4 hours of active application use versus 19 hours of combined active/passive use, 3 days of pure standby time, or 4 days if left in a sleeping mode. Sources, however, say that Apple will only likely achieve approximately 2-3 days in either the standby or low-power modes…

Apple has also been stress-testing the Apple Watch's battery life with pre-bundled and third-party applications. Our sources say that Apple is targeting 2.5 hours of "heavy" application use, such as processor-intensive gameplay, or 3.5 hours of standard app use. Interestingly, Apple expects to see better battery life when using the Watch's fitness tracking software, which is targeted for nearly 4 hours of straight exercise tracking on a single charge.

As Apple is positioning the Apple Watch as a timepiece, the company has conducted numerous tests to determine how long it can run purely in time-keeping modes. We're told that the Watch should be able to display its clock face for approximately three hours, including watch ticking animations, if nothing else is done with the device. However, it's unlikely that most people would actually keep the Apple Watch clock face turned on for even three hours straight in a single day. When the Watch screen is not in use, the display is powered off, and the clock demands much less energy.

Considered separately, the active use app, clock, and fitness numbers sound very low, but the reality is that people will passively wear the Apple Watch for most of the day, actively interacting with it only for short periods of time. That's why the Watch will be able to last the average user roughly a day on a single charge. We're told that Apple has been shooting for roughly 19 hours of mixed usage each day, but that the company may not hit that number in the first generation version.

Sources tell us that battery life has remained a source of concern for Apple over the past year, and was a contributing factor for Apple pushing back the retail launch from an originally planned late 2014 to early 2015. To test real-world performance in a variety of conditions, the company has circulated a surprisingly large number of test units of the Watch: nearly 3,000 are said to be currently roaming around, mostly the stainless steel variant.
Apple has also been working to perfect the MagSafe-based inductive charging mechanism for the Watch, which sources indicate was responsible for slower-than-expected recharging times that hopefully will be fixed in time for the product's release. The company has developed both plastic and stainless steel versions of the circular charger, potentially one for the $349 aluminum and plastic Apple Watch Sport, and the other for the higher-end models. It's unclear at this point whether the company will sell multiple versions of the charger, as Apple has only shown the metal variant, though the Apple Watch Edition is said to ship with a special box and charging dock that may incorporate the stainless steel MagSafe connector.

As of earlier this month, the Apple Watch is on track to ship by the end of March. We previously detailed how the Watch will integrate with the iPhone via an iOS 8.2-based Companion application.

Thursday, January 15, 2015

Chinese $80 Billion Fabless IC

Latest survey of Top fabless semiconductor IC shows the result of a large effort by China to increase the number of IC companies (see below).

 Between 2009 and 2014 the number of Chinese fabless IC companies in top 50 increased from one (HiSilicon) to nine (HiSilicon, Spreadtrum, Datang, Nari Smart Chip, CIDC,  ZTE, Rockchip, RDA, Allwinner) .

"In 2014, the Chinese government described new semiconductor industry programs that will utilize investment by both the Chinese national government ($19.5 billion) and local government and private equity investors ($97.4 billion).”


Already "Chinese fabless IC suppliers held 8% of the top 50 fabless IC market ($80.5 billion) in 2014 and currently hold twice as much top 50 fabless IC market share as the European and Japanese companies combined! Nineteen U.S. companies were represented among the top 50 fabless suppliers in 2014, and they accounted for 64% of the total top 50 fabless company IC sales.  In 2014, Japan held less than 1%”

Ron
Insightful, timely, and accurate semiconductor consulting.
Semiconductor information and news at - 
http://www.maltiel-consulting.com/



China Charts New Course in Targeting Worldwide IC Industry—Fabless!

January 08, 2015

Chinese companies held 9 of the top 50 spots in the 2014 fabless IC company ranking, up from 1 in 2009.

Later this month, IC Insights’ will release the 2015 edition of The McClean Report, which includes a ranking of the top 50 fabless IC suppliers for 2014.

China’s ambitious late-1990s plan to create numerous high-volume indigenous IC manufacturers in the pure-play foundry segment did not come to fruition, but the Chinese government is still very serious about keeping China and Chinese IC suppliers relevant in the future IC industry.  In 2014, the Chinese government described new semiconductor industry programs that will utilize investment by both the Chinese national government ($19.5 billion) and local government and private equity investors ($97.4 billion).  IC Insights believes that these outlays have to potential to significantly change the future IC supplier landscape.

As Chinese IC design houses continue to advance, IC Insights expects an increasing number of China-headquartered companies to move up in the ranking of top fabless IC suppliers.  As shown in Figure 1, there were nine Chinese companies among the top-50 fabless companies in 2014 as compared to only one company in 2009.

In total, the Chinese fabless IC suppliers held 8% of the top 50 fabless IC market ($80.5 billion) in 2014 and currently hold twice as much top 50 fabless IC marketshare as the European and Japanese companies combined! Nineteen U.S. companies were represented among the top 50 fabless suppliers in 2014, and they accounted for 64% of the total top 50 fabless company IC sales.  In 2014, Japan held less than 1% and the “other” countries (e.g., South Korea, Singapore, etc.) represented only 6% of the market held by the top 50 fabless IC suppliers.

Although its original plan of establishing numerous large indigenous IC manufacturers in China was not successful, it is obvious that the Chinese government still intends to create a dynamic environment in the China-based IC industry, including placing additional emphasis on establishing new fabless IC suppliers.  IC Insights believes that the Chinese government’s commitment to creating a more powerful Chinese presence in the future IC industry is alive and well and should be taken seriously.


                       
Figure 1


More details on the 2014 top 50 fabless IC suppliers and China’s future role in the IC industry will be provided in The 2015 McClean Report.

Tuesday, January 13, 2015

More or Less Patents?

Whether a company should own a few or many patents is not a simple question. The article below suggests that a trend started of having few good patents instead of a large basket of patents. 

The problem with few solid patents is that they can be perceived as too broad and would be narrowed down in litigation.  One of the benefits of having a basket of patent related to a specific technology is that different patents will cover facets of the technology through well crafted set of claims. Often it is very difficult to locate a prior art with the same specific structure.

Ron
Insightful, timely, and accurate semiconductor consulting.
Semiconductor information and news at - 
http://www.maltiel-consulting.com/





Patents Strategy Shift Predicted

Quality not quantity to be focus, says expert
Rick Merritt
1/13/2015 09:00 AM EST 

Friday, January 9, 2015

SSD Controllers, Still Secret Sauce (Silicon Motion)

Silicon Motion controllers gain acceptance and is integrated by Hynix, SanDisk, and maybe by Intel (see below).




"SM2256 also features Silicon Motion’s proprietary NANDXtend technology, which utilizes three levels of error correction and data protection to effectively triple the program/erase cycle count for TLC NAND.  Combined with global wear-leveling algorithms, the lifespan of an SSD utilizing the SM2256 is significantly extended.  It also features real-time AES256 encryption, as well as being TCG Opal compliant."

More about Silicon motion (2nd article below) - Silicon Motion Penetrating NAND Flash Fabs - SMI on the Rise



Also See June 2012 ( Flash Memory Controller is the Secret Sauce) 


"Controller is a key edge in designing fast and low power flash memory systems.....even though by 2012 ....5 SSD controller company acquired recently:
* In March of last year OCZ acquired Indilinx 
* In may 2011 SanDisk bought Pliant
* LSI acquired SandForce in October 

* December brought Apple's acquisition of Anobit 
* Now SK Hynix has acquired Link_A_Media"


Ron
Insightful, timely, and accurate semiconductor consulting.
Semiconductor information and news at - 
http://www.maltiel-consulting.com/



Silicon Motion Announces SM2256 SSD Controller WithSupport For TLC NAND — CES 2015 Update


We were privileged yesterday to meet with Robert Fan, Vice President and General Manager of Silicon Motion to discuss their latest SSD controller, the SM2256, which features support for TLC NAND.  Historically, TLC NAND has had a reputation of having low endurance and reliability, and hence was not suitable for use in solid state storage devices.  Fast-forward to today, and we are seeing new technology and software/firmware tools that are able to increase both the reliability and endurance of TLC NAND, now making it a viable alternative to the more expensive MLC NAND for use in certain SSDs.


The SM2256 supports a wide variety of NAND chips, including ONFI 3.0, toggle 2.0 and asynchronous NAND.  It also supports the latest process geometries, including 1x, 1y, and 1z NAND from all major NAND suppliers, and includes 3D NAND.  The SM2256 is a 4-channel controller, yet offers performance that rivals that of 8-channel controllers.  It supports up to 32 NAND devices, which gives it the capability to support up to 1TB of flash storage.  The SM2256 also features a 16-bit wide DRAM interface at DDR3/DDR3L speeds.

As an OEM solution, the SM2256 offers controller and firmware from a single source, simplifying its usage.  The firmware is both customizable and upgradeable. The SM2256 supports both device sleep mode (DevSleep) and PHY sleep mode (CFast PHYSLP), as well as TRIM functions.  It also features S.M.A.R.T. drive performance and health monitoring attributes.

SM2256 on samples

In the above image, we see a trio of engineering samples that are utilizing the Silicon Motion SM2256 with various NAND configurations. In the close-up shot below, we see the SM2256 residing on the PCB of a 512GB SSD utilizing 19nm TLC NAND and a 512MB DDR3 DRAM chip from Hynix.


The SM2256 also features Silicon Motion’s proprietary NANDXtend technology, which utilizes three levels of error correction and data protection to effectively triple the program/erase cycle count for TLC NAND.  Combined with global wear-leveling algorithms, the lifespan of an SSD utilizing the SM2256 is significantly extended.  It also features real-time AES256 encryption, as well as being TCG Opal compliant.

Performance of the SM2256 is augmented by utilizing an SLC cache.  Real world performance numbers from qualifying OEMs put sequential read speeds at a range from 514MB/s to 545MB/s.  Qualifying sequential writes range from 458MB/s to 477MB/s.  Random 4K read speeds are averaging 97,000 IOPS, with random 4K write speeds averaging around 40,000 IOPS.  The screenshot below shows similar results.

Silicon Motion has enjoyed widespread adoption of their previous SM2246 controller, which is being utilized by over 30 OEMs as shown in the graphic below. For additional information click on “SM2256″ in the selection guide here at Silicon Motion’s website.  This will take you to the product page for the SM2256.


Silicon Motion Penetrating NAND Flash Fabs - SMI on the Rise

Silicon Motion Penetrating NAND Flash Fabs with their innovative new controllers (NASDAQ: SIMO)
CES 2015 - Over the last year we've often discussed Silicon Motion's rise in the SSD controller space. The fabless semiconductor's SM2246EN controller was well received, first by smaller SSD manufacturers, and now by NAND flash fabs.

This week, SanDisk announced the new SSD Plus that is priced less than $70 in 128GB. The SSD Plus won't break any performance records but is clearly designed to break price barriers. SanDisk didn't brief media before introducing the SSD Plus at Storage Visions 2015, but since that time we've learned that Silicon Motion is inside with a custom variant of the SM2246EN controller.

Getting one NAND fab company to use your controller is a big step for a controller maker that was virtually unheard of one year ago. Getting two is big news for investors. Just days after the SanDisk announcement, Crucial, a division of Lexar and also a NAND flash manufacturer, announced the new BX100. Again, this new low cost consumer SSD with 16nm MLC flash is managed by a Silicon Motion SM2246EN controller.

They say when it comes it comes in threes. Analysts have recently come forward to state that Intel, a partner with Micron/Crucial/Lexar, has chosen a Silicon Motion controller for an unannounced consumer SSD that should break cover in the coming months. Most likely Intel will brand the new product in the 300 Series family, a low cost series that again is designed to increase the adoption rate of solid state storage technology, replacing mechanical hard drives.

None of this is all that radical when you know the history of the SSD market. SandForce quickly came to power but acquisitions and long product delays have left the door open for Silicon Motion to get a foot in the door. Now that Silicon Motion is sitting at the table, we think the real objective is for the company to use SM2246EN as a stepping stone for SM2256EN, a flash controller that takes advantage of new 3bit per cell technology that will further reduce the cost of solid state storage technology to consumers.